Provides engineering and technical support to plan, schedule, coordinate and execute full life cycle commissioning of critical facilities. Participates in the MEP design process; witnesses the static and dynamic testing of complex mechanical, electrical and control systems and operates the system in normal, maintenance and failure modes of operations by performing the following duties :
- Highly experienced working with chilled water distribution and commercial HVAC systems.
- Performs Test Procedures.
- Prepare meeting minutes.
- Work with fundamental test equipment such as data logging equipment for temperature humidity etc.
- Interacts with contractors and interprets design and specifications.
- Conducts site observation surveys and prepare field reports on the status of projects and completion of projects with respect to compliance with the plans and specifications.
- Prepares punch list reports and determines corrective measures for on-site problems.
- Prepares general condition survey reports.
- Obeys all the projects safety requirements including specific on-site regulations. Performs routine calculations.
- Participates in professional engineering associations and societies.
- Acts as a project coordinator with other field engineers, coordinating printing, presentation, and administration procedures.
- Review project drawings and submittals.
- Develop MEP test procedures.
- Develop MEP operating procedures.
- Respond to RFI's when requested by the PM Team.
- Performs various administrative duties.
- Performs other duties as assigned.
Job Requirements :
Candidate must possess experience and must have knowledge of installation, commissioning, testing, breakdown troubleshooting & maintenance of heavy mechanical systems / sub-systems
Candidate must possess hands-on experience and knowledge of the following mechanical systems :
HVAC Cooling systems (all types)Chiller systems, cooling towers, and associated sub-systems (both water-cooled and air-cooled)AHU / Fan coil unitsetc.Process water systems and treatmentAir HumidificationControl and instrumentation experience such as SCADA / PLC / BMS / EPMS systemsAbility to interpret raw signal data and process it such as temperature and humidity data etc.Control and instrumentation systemsFuel transfer system.Smoke extraction / pressurization controlNetwork & communication system knowledge such as BACNET, Modbus, Ethernet, etc