Talent.com
This job offer is not available in your country.
QC Technician

QC Technician

JOINTHIRE SINGAPORE PTE. LTD.Singapore
30+ days ago
Job description

About Company : Our

client was established in 1997. A wholly owned subsidiary of a

major chemical company in Japan. They produce Super-Pure Hydrogen

Peroxide and Ammonium Hydroxide for the semiconductor

industry.

Job

Description :

  • Reports to the section

engineer and / or designate

  • Carry out all laboratory tests
  • and measurements accurately in accordance to procedure and

    upkeep / maintain the instruments / facilities in good running

    conditions

  • Prepares standards and reagents for analysis
  • in accordance to procedure and ensure that all related

    documentation is maintained

  • Perform basic maintenance
  • and troubleshooting of instruments and write the maintenance report

    after troubleshooting / maintenance

  • Handle ISO
  • Documentation / Raw Data for QA Department

  • Accurately
  • update internal Statistical Process Control (SPC) charts and

    monitor the charts

  • Assist in training for staff for QC
  • Section-related activities when required

  • Maintains and
  • checks inventory of all storage samples and ensure all relevant

    records are maintained

  • Perform receiving of QA
  • department purchase and ensure that received items and all related

    document are correct at the point of receipt

  • Assist in
  • audit preparation

  • Support the QA Section in its
  • activities as and when required

  • Involved in near miss
  • identification and provide work improvement (QEHS)

    suggestions

  • Maintains the general upkeep and cleanliness
  • of the laboratory and related areas by performing

    housekeeping

  • Strictly adhere to all EHS / QMS procedures
  • in all aspects of the activities and observe line discipline and

    5S

  • Performs any other tasks as instructed by the
  • supervisor, engineer, QC section manager and

    HOD

    Job

    Requirements :

  • Diploma in Chemical or
  • science discipline preferred

  • Those with no experience
  • are welcome to apply

  • Experience with analytical
  • instruments like ICP-MS, AAS, etc.

  • Ability to
  • communicate clearly in both writing and verbally and good

    interpersonal skills

  • Basic understanding of ISO9001,
  • ISO14001 and OHSAS18001 standards will be an advantage

    Proficient in Microsoft Office Tools

  • Able to work in
  • cleanroom

    environment

    Compensation :

    Work location : Tuas, Singapore

  • Working hour : Monday to
  • Friday, 8.30am to 5.30pm

  • Overtime and night shift may
  • required

  • Uniform provided.
  • Annual leaves of
  • 14 days (+1 additional day per completed year)

  • Annual
  • Wage Supplement entitlement

  • Variable bonus
  • Variable allowances (Transport and shift allowance)

    Medical and dental benefits

    Create a job alert for this search

    Qc Technician • Singapore

    Related jobs
    • Promoted
    QC Technician

    QC Technician

    APPLIED MICRO TECH PTE LTDD22 Jurong, Jurong Island, Tuas, SG
    Pte Ltd, is a key supplier of critical semiconductor cleanroom equipment material.We are well established both in the local industry and international arena in Asia. The business is now in the growt...Show moreLast updated: 30+ days ago
    • Promoted
    QC Technician - Monthly Rotating Shift - Entry @Joo Koon

    QC Technician - Monthly Rotating Shift - Entry @Joo Koon

    AIM RECRUIT CONSULTANCY PTE. LIMITEDIslandwide, SG
    Monthly Rotating Shift; Basic $2,500 - $3,000;.Morning Shift : 7am - 3pm; Afternoon Shift : 3pm - 11pm ($8.Night Shift : 11pm - 7am ($14 / day). Company transport at various location in the west.Perform ...Show moreLast updated: 11 days ago
    • Promoted
    QC Technician - D22 Jurong, Jurong Island, Tuas, SG

    QC Technician - D22 Jurong, Jurong Island, Tuas, SG

    PHARMAGEND GLOBAL MEDICAL SERVICES PTE. LTD.D22 Jurong, Jurong Island, Tuas, SG
    Perform analytical equipment lifecycle management as per current regulatory requirements / SOP.Support and / or perform maintenance / calibration of laboratory equipment in compliance with establis...Show moreLast updated: 7 days ago
    • Promoted
    QC Technician #75340

    QC Technician #75340

    ANRADUS PTE. LTD.Islandwide, SG
    Industry / Organization Type : Precision Manufacturing.Working Hours : 5 days (Mon - Fri, 8.Basic salary up to $2,000 + Performance Bonus. Prepare and submit first article samples for approval.Create p...Show moreLast updated: 3 days ago
    • Promoted
    QC Technician #77167 - ANRADUS PTE. LTD.

    QC Technician #77167 - ANRADUS PTE. LTD.

    ANRADUS PTE. LTD.Islandwide, SG
    Industry / Organization Type : Engineering.Mon to Fri 9AM – 7PM, Sat 9AM – 1PM).Basic Salary up to $2,200 + AWS + Bonus.Perform in-process, final, and incoming inspections of precision parts using me...Show moreLast updated: 3 days ago
    • Promoted
    QC Technician - D22 Jurong, Jurong Island, Tuas, SG

    QC Technician - D22 Jurong, Jurong Island, Tuas, SG

    APPLIED MICRO TECH PTE LTDD22 Jurong, Jurong Island, Tuas, SG
    Pte Ltd, is a key supplier of critical semiconductor cleanroom equipment material.We are well established both in the local industry and international arena in Asia. The business is now in the growt...Show moreLast updated: 13 days ago
    • Promoted
    QC Technician

    QC Technician

    PHARMAGEND GLOBAL MEDICAL SERVICES PTE. LTD.D22 Jurong, Jurong Island, Tuas, SG
    Perform analytical equipment lifecycle management as per current regulatory requirements / SOP.Support and / or perform maintenance / calibration of laboratory equipment in compliance with establis...Show moreLast updated: 7 days ago
    • Promoted
    QC Technician / Printing Industry -Tuas - AIM RECRUIT CONSULTANCY PTE. LIMITED

    QC Technician / Printing Industry -Tuas - AIM RECRUIT CONSULTANCY PTE. LIMITED

    AIM RECRUIT CONSULTANCY PTE. LIMITEDIslandwide, SG
    Working hours : Mon - Fri, 8am - 5.Perform sampling incoming quality inspection.Perform using equipment such as Vernier Caliper, Micrometer, Guages, Profile Projector and Smart Scope.Interested appl...Show moreLast updated: 15 days ago
    • Promoted
    QC Technician - PHARMAGEND GLOBAL MEDICAL SERVICES PTE. LTD.

    QC Technician - PHARMAGEND GLOBAL MEDICAL SERVICES PTE. LTD.

    PHARMAGEND GLOBAL MEDICAL SERVICES PTE. LTD.D22 Jurong, Jurong Island, Tuas, SG
    Perform analytical equipment lifecycle management as per current regulatory requirements / SOP.Support and / or perform maintenance / calibration of laboratory equipment in compliance with establis...Show moreLast updated: 7 days ago
    • Promoted
    QA / QC Technician 【Engineering | 5 days】22104523 - Islandwide, SG

    QA / QC Technician 【Engineering | 5 days】22104523 - Islandwide, SG

    STAFFKING PTE. LTD.Islandwide, SG
    Inspect incoming raw materials and verify supplier documents.Conduct in-process and final product inspections (dimensions, leakage, surface finish, etc. Prepare and maintain QA / QC records, SOPs, and...Show moreLast updated: 11 days ago
    • Promoted
    QC Technician - APPLIED MICRO TECH PTE LTD

    QC Technician - APPLIED MICRO TECH PTE LTD

    APPLIED MICRO TECH PTE LTDD22 Jurong, Jurong Island, Tuas, SG
    Pte Ltd, is a key supplier of critical semiconductor cleanroom equipment material.We are well established both in the local industry and international arena in Asia. The business is now in the growt...Show moreLast updated: 13 days ago
    • Promoted
    QC Technician / Printing Industry -Tuas

    QC Technician / Printing Industry -Tuas

    AIM RECRUIT CONSULTANCY PTE. LIMITEDIslandwide, SG
    Working hours : Mon - Fri, 8am - 5.Perform sampling incoming quality inspection.Perform using equipment such as Vernier Caliper, Micrometer, Guages, Profile Projector and Smart Scope.Interested appl...Show moreLast updated: 15 days ago
    • Promoted
    QC Technician #75340 - Islandwide, SG

    QC Technician #75340 - Islandwide, SG

    ANRADUS PTE. LTD.Islandwide, SG
    Industry / Organization Type : Precision Manufacturing.Working Hours : 5 days (Mon - Fri, 8.Basic salary up to $2,000 + Performance Bonus. Prepare and submit first article samples for approval.Create p...Show moreLast updated: 3 days ago
    • Promoted
    QA / QC Technician 【Engineering | 5 days】22104523

    QA / QC Technician 【Engineering | 5 days】22104523

    STAFFKING PTE. LTD.Islandwide, SG
    Inspect incoming raw materials and verify supplier documents.Conduct in-process and final product inspections (dimensions, leakage, surface finish, etc. Prepare and maintain QA / QC records, SOPs, and...Show moreLast updated: 11 days ago
    • Promoted
    QC Technician #77167 - Islandwide, SG

    QC Technician #77167 - Islandwide, SG

    ANRADUS PTE. LTD.Islandwide, SG
    Industry / Organization Type : Engineering.Mon to Fri 9AM – 7PM, Sat 9AM – 1PM).Basic Salary up to $2,200 + AWS + Bonus.Perform in-process, final, and incoming inspections of precision parts using me...Show moreLast updated: 3 days ago
    • Promoted
    QC Technician #75340 - ANRADUS PTE. LTD.

    QC Technician #75340 - ANRADUS PTE. LTD.

    ANRADUS PTE. LTD.Islandwide, SG
    Industry / Organization Type : Precision Manufacturing.Working Hours : 5 days (Mon - Fri, 8.Basic salary up to $2,000 + Performance Bonus. Prepare and submit first article samples for approval.Create p...Show moreLast updated: 3 days ago
    • Promoted
    QA / QC Technician 【Engineering | 5 days】22104523 - STAFFKING PTE. LTD.

    QA / QC Technician 【Engineering | 5 days】22104523 - STAFFKING PTE. LTD.

    STAFFKING PTE. LTD.Islandwide, SG
    Inspect incoming raw materials and verify supplier documents.Conduct in-process and final product inspections (dimensions, leakage, surface finish, etc. Prepare and maintain QA / QC records, SOPs, and...Show moreLast updated: 11 days ago
    • Promoted
    QC Technician #77167

    QC Technician #77167

    ANRADUS PTE. LTD.Islandwide, SG
    Industry / Organization Type : Engineering.Mon to Fri 9AM – 7PM, Sat 9AM – 1PM).Basic Salary up to $2,200 + AWS + Bonus.Perform in-process, final, and incoming inspections of precision parts using me...Show moreLast updated: 3 days ago