Welder - Aerospace

Core Responsibilities :

• Plan and layout welding work on titanium, aluminum, nickel based alloys and stainless steel parts, following standardized work procedures and parameters.
• Comply with engine manuals, operation sheets and parameter sheets.
• Check and verify part number and serial number against traveler.
• Develop and fabricate fixtures as required.
• Prep part by cleaning with acetone, polishing, wire brush or scotch bright before welding.
• Set up equipment to accommodate variations in parts and ensure quality welds are achieved.
• Position parts in jigs or fixtures.
• Support audits and correct audit findings.
• Support improvement activities using BES tools.
• Weld butt joint or build up worn or defective surfaces on components.
• Use welding processes in accordance with practices and specifications found in engine manuals.
• Examine weld for bead size and other specifications.
• Blend, grind or polish weld ensuring specified minimum wall requirement is met.
• Use gas welding, brazing and any combination of welding processes in accordance with standard practices and specification found in engine manual.
• Use calipers, micrometers, indicators and gauges to measure repaired part and ensure dimensional requirements are met.
• Maintain welding certification in specific welds and material as required.
• Highlight operation discrepancies and abnormal part condition to immediate Cell Leader.
• Maintain good housekeeping practices on machines and in work area.
• Wear necessary protective gloves, masks, shields and coats as required.
• Comply with all company and safety rules and regulations during course of duties.
• Thoroughly complete production paper work and systems transactions.

Requirements

Skills Required

Welding Inspection, Cnc Programming, Heat Treatment, Tig Welding, Mig Welding, Blueprint Reading, Metal Fabrication, Aerospace, Aviation, Aeronautics